The steel structure factory itself has the characteristics of light weight, high strength, strong compressive capacity, and short construction period. The inclusion of aesthetic elements in the artistic structure is an important reason why it quickly became a hot topic.
The specific construction process of the
steel structure factory:
1. Hoisting of the main structure of the steel structure factory: splicing steel beams on the ground, erecting steel columns, hoisting steel beams, connecting substructures, correcting structural deviations of the main structure, installing crane beams (optional), hoisting mezzanines (optional), and applying fireproof coating. The deviation of the main structure of the steel structure factory building should comply with the specifications and design requirements, and the initial and final tightening of high-strength bolts should meet the requirements.
2. Installation of secondary structures in steel structure factories: roof wall purlins, roof wall supports, flange supports, etc.
How to construct steel structure factory buildings and the construction process of steel structure factory buildings
3. Installation of steel structure factory building panels and insulation layers: The insulation layer should be laid first, and then the roof panels should be installed (some projects also lay a layer of steel wire mesh under the insulation layer to prevent the insulation layer from falling off, which mainly depends on the insulation layer grade). The roof is mainly waterproof. Therefore, it is necessary to overlap the billboard with the wooden board, nail the wooden board, apply glue fully but not fully, wipe the glue clean, and do not damage the coating on the board surface to prevent rusting, etc.
4. Maintenance and installation of the walls of the steel structure factory: mainly installing wall insulation layers and wall panels. The wall is mainly a matter of aesthetics and waterproofing in the window area. Another issue is to determine if there are any deviations in the installation. For example, the bottom should be flat, the entire plane should be flat, and the flatness deviation between boards should meet the requirements.
5. Detailed structure of steel structure standard factory building: mainly includes decorative installation, such as corner wrapping between roof and wall, corner wrapping between wall, waterproof board between wall panel and brick wall, door and window decoration, etc. The detailed structure is a part of beautiful engineering. The latter part is also one of the main components, so horizontal, planar, and vertical are fundamental.
